DoorKing 9150 1 HP Vehicular Slide Gate Operator
The DoorKing 9150 1 HP Slide Gate Operator delivers maximum power and reliability for heavy gates in demanding applications. Designed for extended-length or heavier gates, this operator features the same worry-free, self-adjusting functionality as the 1/2 HP model but with enhanced power capabilities. Available with either a durable steel or lightweight polypropylene cover, this versatile operator can be configured for front, center, or rear drive applications in commercial and industrial settings.
Heavy-Duty Performance
- 1 HP continuous-duty motor for demanding applications
- Handles extended-length gates up to 45 feet
- Supports gates up to 1,500 pounds in weight
- Smooth operation at approximately 10 inches per second
- Ideal for commercial and industrial high-use environments
Innovative Safety Features
- Electronic magnetic limits eliminate mechanical switches that can wear out
- Automatic self-setting limits require no adjustments
- Built-in mechanical and electronic reverse system
- Automatically assumes fail-safe mode when an entrapment condition exists
- Compliant with UL 325 and 991 standards (ETL listed)
Versatile Installation Options
- Configurable for front, center, or rear drive applications
- Pad or post mount capability
- Choice of durable steel or lightweight polypropylene cover
- Units with polypropylene cover include MicroPlus RF Kit (1 TX + 1 REC)
- Multiple voltage options for installation flexibility
Available Models
-
1 HP with Steel Cover:
- SKU: 9150-380
- Durable galvanized steel housing
- Enhanced weather and impact resistance
- Traditional industrial appearance
-
1 HP with Polypropylene Cover:
- SKU: 9150-385
- Lightweight, corrosion-free housing
- Includes MicroPlus RF Kit (1 TX + 1 REC)
- Contemporary appearance
Specifications
Gate Capacity
- Maximum Gate Length: 45 feet (13.7 m)
- Maximum Gate Weight: 1,500 pounds (680 kg)*
- *1,300 pounds with DC Convenience Open option
- Operating Speed: Approximately 10 inches per second (254 mm/sec)
Electrical
- Motor: 1 HP continuous-duty
- Input Power Options:
- 115 VAC, 60 Hz, 9.7A (standard)
- 208 VAC, 60 Hz, 5.0A (with step-down transformer)
- 230 VAC, 60 Hz, 4.9A (with step-down transformer)
- 460 VAC, 60 Hz, 2.7A (with step-down transformer)
- Step-down transformers used to achieve 115 VAC operating voltage
Construction
- Frame: G90 galvanized steel to prevent rusting
- Cover Options:
- Steel Cover (9150-380): 15.25"W x 24.50"H x 16.75"D
- Polypropylene Cover (9150-385): 15.46"W x 24.50"H x 16.93"D
- Primary Reduction: Single cog belt
- Chain: 20 ft (6 m) of #40 roller chain included with brackets and hardware
- Shipping Weight: 125-185 lb (68-84 kg)
Advanced Control Features
- Microprocessor control board with programming switches
- Auto-close timer (1-23 seconds)
- Partial-open feature for pedestrian or limited access
- Anti-tailgating functionality for enhanced security
- Gate Tracker™ reporting output for access control integration
- Selectable stop/reverse loop function
- Built-in On/Off switch and alarm reset switch
- Two 115 VAC convenience outlets
- Ports for plug-in loop detectors (DKS detectors only)
Safety & Compliance
- Requires monitored Type B1 and/or Type B2 entrapment protection devices
- Operating Temperature: 10°F to 140°F (-12°C to 62°C)
- Thermostatically controlled heater kit available for colder environments
- Conforms to ANSI/CAN/UL 325:2017 Ed. 7
- Certified to CSA C22.2 #247
- Suitable for Class I, II, III, and IV applications
Options
- Heater kit for cold weather environments
- Base plate for post mounting
- Fail-secure release kit (fail-safe is standard)
- DC Convenience Open feature
Note: Five-year limited warranty included. Compatible with required entrapment protection devices sold separately. Polypropylene cover model (9150-385) includes MicroPlus RF Kit.
