The Linear MT-1B 1-Channel Block Coded Visor Transmitter is designed for use with Linear access control products. The Linear MT-1B is a single-channel device. Pressing the button on the transmitter will send a signal. A visor clip is included.
The Linear MT-1B transmitter is MegaCode format, which means each transmitter is factory preprogrammed with one of over 1,000,000 codes, virtually eliminating the possibility of code duplication. Because the receiver ”learns” each specific code, no unauthorized person can gain access to the system by reprogramming a transmitter.
Block coded transmitters are factory programmed to a sequential series of transmitter ID codes. When used with a Linear access controller, transmitters can be locally or remotely programmed into memory by entering the first and last codes of the block into the system. Facility codes can be selected to further customize the system.
I am unsure if the codes are printed on the back, and unfortunately I don't have these in stock to check that.
J. jd 26-04-2023 These come pre-coded from the factory. You can't have the same code for each remote, because it'll block each other out, so to say. You can do special coding, but would need to supply us with the site facility code and a starting sequence number.
Stay on top of your Perimeter Security needs
