FAAC S418 24V Electromechanical Swing Gate Opener

• Built-in opening and closing mechanical stops eliminate the need for external stops
• Innovative "multi-position" bracket system allows for non-welded installation, reducing setup time
• Advanced E024U control board with reverse-on-contact safety feature
• Integrated battery backup system ensures uninterrupted operation during power failures
• Effective stroke length of 13.8 inches (350mm) for smooth operation
• Continuous duty operation for high-traffic applications
• UL325 compliant for Class I, II, III, and IV applications

Gate Capacity

• 10 ft gates: Up to 720 lb (326 kg)
• 12 ft gates: Up to 500 lb (227 kg)
• 14 ft gates: Up to 370 lb (168 kg)
• 16 ft gates: Up to 280 lb (127 kg)

• Input Voltage: 24 VDC
• Maximum Power: 35W
• Maximum Thrust: 404 lbf (180 daN)
• Opening Time (90°): 10 seconds
• Maximum Opening Angle: 110°
• Operating Temperature: -4°F to 131°F (-20°C to +55°C)
• Protection Class: IP54
• Operator Weight: 13.2 lb (6 kg)
• Dimensions (L x D x H): 32.5" x 4" x 4.9" (825x104x125mm)

System Integration

• Compatible with FAAC's 433MHz rolling code transmitters and receivers
• Supports integration with loop detector systems for vehicle detection
• Compatible with XP30 photobeam safety systems
• Adaptable for single or bi-parting gate applications

• S418 Operator - 10430115
  
• E024U Control Board with Battery Backup - 5550.1
  
• 433 RC Plug-In Receiver - 787856
  
• Two 4-channel XT4 433 RC transmitters - 787453
  
• One pair of XP 30 photobeam photocells - 785105
  
• XP30 adapters for conduit connection - 401064

Note: An electric or magnetic lock is recommended for gates longer than 12 ft (3.6 m). Performance specifications may vary based on mounting dimensions, wind factors, and gate design.